애터미 써머 텀블러
1 / 6애터미 써머 텀블러
- Free Shipping
- Free Shipping
Cool in the summer!
Warm in the winter!
Atomy Thermal Tumbler
that can be used all year round
Atomy Thermal Tumbler
420mL x 1ea
Outstanding durability for cooling and
insulation simultaneously
Atomy thermal tumbler
Excellent insulation/cooling
STS304 material, copper-plated coating double vacuum insulation structure
Easy to clean, hygienic structure
Detachable tea strainer, large opening for easy and convenient use
Convenient portability
Ring handle structure for safe and convenient portability
Safe usability
Silicone pad attached for anti-slip
Simultaneous insulation and cooling!
Strong and consistent
temperature maintenance
Using copper-plated coating and STS304 material on the inside/outside of the tumbler allows for simultaneous insulation and cooling
ST304
Copper- plated coating
ST304
Insulation
Cooling
Double vacuum insulation structure
Atomy thermal tumbler
Copper-plated coating and STS304 material create a double vacuum wall, increasing the internal capacity by 10% with a thin vacuum layer.
More convenient and safer
Large opening and detachable tea strainer
With a large opening, adding ice or drinks is easy, and the detachable cap makes cleaning a breeze.
Even more convenient portability
Ring handle
With a ring handle type, it allows for even more convenient portability anytime, anywhere.
Safe with
anti-slip silicone pad!
The silicone pad attached to the bottom prevents slipping and makes it safe to use.
Q&A
Are there any beverages that should not be used with products that have heat retention capabilities?
Please avoid using dry ice, carbonated drinks, salty foods like soybean paste soup, tea, dairy beverages, etc., in sealed water bottles or thermal bottles. These items can spoil easily, generate gas, and increase pressure inside the container when sealed. This could lead to the lid popping off or the beverage spilling when opened. Kindly refrain from using such beverages.
Can red spots or discoloration occur inside the tumbler?
Red spots or discoloration inside may result from water quality, impurities, or tannin components in beverages like coffee or tea. To address this, fill the tumbler with warm water and 10% vinegar, soak for 30 minutes, then clean with a soft sponge brush.
Water droplets form inside the plastic lid.
This can happen when you pour hot water into it. It is a condensation phenomenon caused by the temperature difference between the container and the surrounding air, and it is not a product defect.
Can I close the lid with a tea bag inside?
If the tea bag swells, it may cause the beverage to leak or spurt out. When using a tea bag, please keep the top lid open.
Cautions
- Do not use for purposes other than insulation and warming.
- Ensure the silicone packaging is removed before use.
- Clean thoroughly before and after use.
- Do not subject the product to strong impacts.
- Do not use in a microwave or dishwasher.
- Ensure the lid is securely closed.
- Keep out of reach of children.
- Dairy products and juices may spoil if stored for an extended period.
- Do not overfill the container; leave enough space for the lid.
- Be cautious when handling hot liquids, as there is a risk of burns if spilled.
- If the outside of the container becomes hot after filling with hot liquids, the insulation may be defective.
- In such cases, exchange it at the place of purchase.
- The lid may deform after boiling.
- Exercise caution when drinking hot liquids, especially in a moving vehicle, to avoid burns.
- After filling with liquids, close the lid securely and check for any leakage.
- When shaking the container with hot liquids inside, exercise caution to avoid burns or spills. Before use, ensure that all parts, such as the lid and container set, are correctly assembled and tightly sealed.
- Always use the lid set fully closed. Ensure the bottom part of the lid is completely sealed, especially when opening the top cap (both caps may open simultaneously when twisted).
Product Information
Atomy Thermal Tumbler
Year-round use:
keeps warm in winter, cool in summer
| Product Name | Atomy Thermal Tumbler |
|---|---|
| Manufacturer | Lock & Lock (Contract Manufacturing in China) |
| Distributor | Atomy Co., Ltd. |
| Country of Origin | China |
| Materials | Body/Stainless Steel 304, Cap, Strainer/Polypropylene (PP), Packing/Rubber (Silicone Rubber) |
| Specifications | 420mL (14.2 FL, OZ.) |
This product adheres to the principles of using
good raw materials, optimized technology,
and thorough quality control.
Each step of the production process strictly follows
ATOMY’s meticulous quality assurance standards,
from the selection of raw materials to the
creation of the finished product.
The product is only manufactured in safe facilities that have passed
stringent supplier registration tests.
Regular on-site and cross-facility inspections of our partner companies
are conducted through a third-party certification body.
This allows us to ensure we manufacture products of the absolute quality.
LIVING
- Ensuring the safety and stability of the product in accordance with legal standards
- Regular testing for harmful substances
- Verification of raw materials / suppliers / labeling / certification
- Direct verification from raw material intake to product shipment
- Ongoing inspection of product specifications (appearance, weight, dimensions, packaging, performance)
